Rent cheap now
Reseller wanted

Human Detector Shop

Human Detector

Protection of exhibits and artwork in museums - Products and specs

Human Detector sensor module (Item: HD-SM)

Compact sensor module for the protection of automobiles

Integrated seismic and capacitive sensors (adjustable sensitivity)
Optional radar sensor for the deployment with convertibles

Connection terminals for external alarm systems (such as motion sensors) 
Isolated output NC (VDS compatible)
Long term operation with powerful lithium batteries 
Integrated loud transmitter for alarm messages (adjustable duration) 
Secure, encrypted radio operation with a range of up to 300 metres
Installation with screws, glue, ties or magnetic mounting plate 

Measurements sensor housing: 117w x 85h x 41d in mm 
Weight: 160 grams (including batteries) 
Operating voltage: 2 x lithium CR123 batteries or on-board supply
Scope of delivery: Sensor module, 2 x CR123 batteries, installation instructions



Human Detector centre (Item: HD-C)

Centralized control for Human Detector module (max. 1000)
Secure, encrypted radio operation and large range through separate aerial
Embedded, powerful alarm siren
RS-485 interface for controlling of external surveillance cameras
8 x alarm output for controlling video recording devices, sirens, signal lights, etc.
Installed rechargeable battery for emergency operation in case of power failure
USB-interface for configuration, including configuration software in German/English
Measurements housing for wall mounting: 139w x 210h x 58d in mm
Weight: 460 grams (without power supply)
Operating voltage: 230V/50 Hz AC
Scope of delivery: Human Detector centre, power supply, software, manual




Radar sensor (Item: RS-1Z)

• Single-zone radar sensor
• Range: approx. 2.5m (adjustable)
• Measurements housing: 68w x 60h x 14d in mm
• Weight: 30 grams
• Operating voltage: 12V DC (connector for Human Detector)




Recommended accessories:

• Replacement batteries for Human Detector (Item: CR123) 
• 12V on-board supply cable (Item: HD-12V)             
• Potential plate for loose installation (Item: HD-GND)
• Connector cable with clips (Item: HD-AS)      
• Magnetic mounting plate (Item: HD-MAG)
• PTZ-surveillance cameras (on request)
• NVR-network video recording device (on request)
• Alarm systems, sirens and accessories (on request)
• Paging systems (on request)

Additional accessories are available on request. We would be very happy to provide advice for the integration of our Human Detector systems into your existing alarm- and video surveillance systems.


Brochure Human Detector in museums

The capacitive sensor can only be deployed in a dry environment (indoor). Capacitive sensors work with conducting materials, such as metal and carbon.
The range of wireless transmission is variable depending on the type of building and fittings. Maximum distances can be achieved in open spaces.
The optional radar sensor has an independent housing, therefore increasing the total power consumption.
For operation an external power supply is required. Technical specifications are subject to change without notice.

We use cookies on our website. Some of them are essential for the operation of the site. You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.