SENSOR MODULE FOR CONTACTLESS PROTECTION OF PAINTINGS
HDF-OPTICAL secures:
|
The ultra-compact HDF-OPTICAL sensor module can be easily installed behind paintings and pictures. It is fixed to the wall behind the object. A low-energy IR signal is emitted twice per second. The reflection is monitored. If any changes occur, an alarm is triggered. This enables detection, in case the picture is removed. The low energy, the very short pulse time and the large-area distribution of the IR rays prevent damage to the back of the painting to be monitored.
HDF-OPTICAL can be used both for pictures hanging on gallery rails and for wall-mounted pictures. The integrated 868 Mhz transmitter module achieves a high range even in solid buildings such as castles and palaces. The Human Detector Flex sensor HDF-OPTICAL can be combined with all alarm and voice output devices (such as HDF-BUZZER and HDF-SPEECH) and the alarm monitoring unit HDF-AMD.
The highlights at a glance, please click on the pictogram for further information:
TECHNICAL SPECIFICATIONS
Technology | Wireless sensor module for optical monitoring of paintings | ||||||||||||||
Detection method | IR reflectance measurement with low energy density | ||||||||||||||
Emphatic installation | Concealed installation behind the picture or frame | ||||||||||||||
Transmission frequency | 869,5 MHz | ||||||||||||||
Transmission power | + 15 dBm | ||||||||||||||
Range | Up to 1500 m in open area, good penetration of walls due to modulation with frequency spread spectrum modulation *1 |
||||||||||||||
Supply voltage | 3 V lithium battery CR2450 changable, external supply voltage 8-14 V AC/DC *2 | ||||||||||||||
Supply current | Typ. 2 μA standby, 20 mA measuring, 50 mA transmission, 42 μA on average | ||||||||||||||
Response time | Typically 50 ms for complete transmission | ||||||||||||||
Other functions | Concealed micro switch for switching on and off Micro push-button for linking individually and for test mode IR transmitter and receiver unit (detection range up to 25 mm) Automatic microprocessor controlled calibration Battery life up to 20 months *3 Monitoring strength of receive signal Monitoring battery voltage (alarm before end of battery life) All operating modes supported (EASY-, MULTI- and PROFI-Mode) *4 |
||||||||||||||
LED | 3 mm LED red indicating radio operation, 3 mm LED green indicating program function | ||||||||||||||
Dimensions | 70,4 mm (L) x 50,4 mm (W) x 17 mm (H) | ||||||||||||||
Weight | Approx. 41 grams including battery | ||||||||||||||
Material of casing | Impact-resistant plastic ABS UL94V-1 | ||||||||||||||
Protection class | IP20 (EN 60529) | ||||||||||||||
Temperature range | -10° C bis +60° C if powered | ||||||||||||||
Humidity | 0-95%, non-condensing | ||||||||||||||
Conformity | EN 61000-6-2; EN 61000-6-3; EN 62368-1; EN 63311 ETSI EN 301489-1, ETSI EN 301489-3, ETSI EN 300220-2; EN 63000 (RoHS) |
||||||||||||||
*1 The range achieved may vary depending on the spatial conditions. All measurements carried out with standard module antenna. Specifications are subject to change without prior notice. All measurements were performed under specific conditions. DISCLAIMER: This document, as well as all other documents (offers / specifications / letters / etc.), do not guarantee any functionality of our products desired by the customer. heddier electronic GmbH does not guarantee any functionality or marketability desired by the customer. The customer should be able to make his own decision on the basis of the transmitted documents. heddier electronic GmbH supports him in this as far as it is given by the "General Terms and Conditions of Delivery and Business of heddier electronic GmbH". In no event will heddier electronic GmbH be responsible for damages of any nature whatsoever resulting from the use of or reliance upon information from this document or the products to which the information refers. Excluded from this are damages caused by negligent behavior or damages regulated by superior laws. |
|||||||||||||||
|