Rent cheap now
Reseller wanted

Human Detector Shop

Human Detector

HDF-AMD  Alarm-Management-Device

shop.jpg

HDF-AMD

shop.jpg

HDF-ANTIJAM

 SYSTEM FOR INTELLIGENT ALARM MANAGEMENT

hdf_shock.jpg          

The HDF-AMD automatically monitors all activities and alarms in your museum. Alarm messages are routed directly to internal or external control centres or receivers. The professional solution avoids the exhibition being disturbed by alarm sounds, if desired. The HDF-AMD system is a forward-looking and innovative form of alarm monitoring and processing.

alarmzentraleDue to its various alarm control units and sensor modules the Human Detector Flex alarm system is the ideal basis for effectively securing and guarding exhibitions, collections and luxury goods. Operators quite often do not wish to disturb visitors of the exhibition with acoustic alarms from the alarm system. Private collectors may wish to have alarm messages sent to external control centres or guard services. Video control centres were therefore installed in large museums for example with specially trained staff. The alarm centres control the room supervisors by radio and direct them to the exact location where the alarm was triggered. The HDF-AMD radio system can take over the task largely independently. The so-called alarm management unit evaluates all alarm messages and forwards them to the various destinations via SIA-DC09 CID protocol.There is no need for the usual siren sounds and voice messages, if required. The HDF-AMD offers various additional functions for comprehensive alarm management.

 

All highlights at a glance - please click on the pictogram to get more information: 

reichweite intern dt externe antenne dt jammer dt
silence dt multi mode dt profi mode dt

 

Convenience, increased security and cost reduction through alarm management

The Human Detector Flex system offers the possibility to expand your security technology with a modern alarm management system. This extension can be set up retrospectively for all existing installations, regardless of whether they are operated in EASY- or MULTI-Mode. The HDF-AMD unit is installed on your premises for this purpose. The compact device comprise three antennas and thus reliably receives all radio communication from the alarm sensors and radio control centres used. Several HDF-AMD can be combined with each other. hdf amd arrowThe initial installation of the HDF-AMD is easy and straightforward with the Configurator software. The installation enables the operator to use various new functions. These demonstrate the great flexibility of the security system and offer applications that are otherwise only known from larger control centres. This operating mode is called PROFI-Mode, to distinguish the gained functionality between EASY- and MULTI-Mode. 

 

Alarm-by-Silence - Exhibitions without interfering noise

There is a fine line when using security technology in museums where warning alarm sounds tend to disrupt an exhibition. Without doubt alarm sounds must be loud and act as a deterrent. But, if it occurs more frequently, it will be perceived to be a nuisance. With the Human Detector Flex technology there is no more need for disruptive alarm sounds at the protected object. On the other hand, it is possible to issue short warning tones or voice messages at selectable locations in the exhibition. This reduces disturbances of exhibitions by alarm messages to a minimum or to zero.

 

Increased safety through detection of jammers

hdf antijamIt is possible, in principle, to connect the radio alarm control panels (HDF-BUZZER and HDF-SPEECH) by cable to external systems such as burglar alarm systems. The use of wireless radio technology offers several advantages in terms of installation and the wiring work which is no longer necessary as a result. The transmission signal used by the Human Detector Flex enables a secure connection over longer distances. To reduce the risk of jamming, an additional protective measure can be activated in PROFI-Mode. The optional anti-jamming unit HDF-ANTIJAM is used for this purpose. The pilot transmitter sends a control signal that is monitored by the HDF-AMD alarm management system. Manipulation and interference is thus detected.

 

TECHNICAL SPECIFICATIONS

Technology Wireless radio unit with Ethernet interface and Linux operating system
Receive frequency 869,5 MHz
Receive sensitivity -121 dBm alarms, -116 dBm IoT platform 
Transmitter output +15 dBm, +13 dBm IoT platform
LED 3 x 5 mm red indicating radio operation,
2 x 5 mm green and yellow LED for programming functions
Interfaces Ethernet-Port RJ45, WLAN for configuration *1
Antennas 3 Whip antenna with 90° bend, SMA connector (male)
Main functions Wall installation via lateral retaining lugs
Monitoring strength of receive signal
Supporting all operating modes (no restriction on the number of modules)
Alarm output via SIA-DC09 COR-Protoco*2
Monitoring of alarm confirmations from the radio control centres *3
Monitoring activation/deactivation of the radio control centres *3
Secure forwarding of alarm messages to external service providers *4
Detection of jamming devices (optional with HDF-ANTIJAM)
Supply voltage 230 VAC, 50 Hz (mains adapter included) *5
Dimensions 129 mm (L) x 155,6 mm (W) x 45 mm (H) 
322 mm (L) x 206 mm (W) x 45 mm (H) with antennas *6
Weight 565 g (incl. plug-in power supply)
Material of casing Impact-resistant plastic ABS UL94V-1
Protection class IP20 (EN 60529)
Temperature range -10° C to +60° C if powered
Humidity 0-95%, non-condensing
Content of delivery HDF-AMD wireless unit, power supply and 3 antennas
Conformity EN 61000-6-2; EN 61000-6-3; EN 62368-1; EN 63311
ETSI EN 301489-1, ETSI EN 301489-3, ETSI EN 300220-2; EN 63000 (RoHS)


*
1 The HDF-CONFIGURATOR software is used for configuration. Available to download or in digital format on request.
*2 Supporting alarm centres with SIA-DC09 CID Standard. For further information please see the installation manual.
*3 For monitoring alarm confirmation and activation/deactivation, an HDF-EXTERN module must be connected to the radio control units.
*4 The connection of external service providers is via SIA-DC09 CID standard.
*5 If required, the HDF-AMD radio unit can also be operated without a plug-in power supply unit; operating voltage is 10-13.2 V DC, 2A.
*6 The supplied antennas can be replaced by external antennas or can be bent. Dimensions change therefore accordingly.

Specifications are subject to change without prior notice. All measurements were performed under specific conditions.

DISCLAIMER: This document, as well as all other documents (offers / specifications / letters / etc.), do not guarantee any functionality of our products desired by the customer. heddier electronic GmbH does not guarantee any functionality or marketability desired by the customer. The customer should be able to make his own decision on the basis of the transmitted documents. heddier electronic GmbH supports him in this as far as it is given by the "General Terms and Conditions of Delivery and Business of heddier electronic GmbH".

In no event will heddier electronic GmbH be responsible for damages of any nature whatsoever resulting from the use of or reliance upon information from this document or the products to which the information refers. Excluded from this are damages caused by negligent behavior or damages regulated by superior laws.

 

Downloads for this product

  This might be of interest ...

 

 

brochure
Brochure  


 

 

manual
Installation Manual

          

HDF-BUZZERHDF-BUZZER

HDF-BUZZERHDF-SPEECH

 

We use cookies on our website. Some of them are essential for the operation of the site. You can decide for yourself whether you want to allow cookies or not. Please note that if you reject them, you may not be able to use all the functionalities of the site.